Olivetti 3D IoT, Руководство пользователя, Страница: 48 / 77

3-14 User Manual 596806-02
PREPARE MENU
The Prepare Menu allows you to carry out the main machine adjustments. Select Prepare to access the
following submenu:
Figure 3-19 Prepare Submenus

Resume

resumes the last saved job, as previously described in the section
“Suspending and
interrupting printing
”

Change FIlament

procedures for changing the filament, as previously described in the section
“Suspending and interrupting printing”

Move

movement of X, Y and Z axes

Bed Level

procedures for levelling the printing table, as previously described in the section
“Aligning
the printing table
”

Back

Returns you to the Main Menu
MOVE COMMAND
When you select the
Move command, the following screen is displayed.
Figure 3-20 Move Submenu
The Distance, Speed and Acceleration parameters on the right of the display allow you to define the distance
and speed of movement of the Axes and of the Extruder:

DISTANCE (mm): you can set the movement from a minimum of 0.1 mm to a maximum of 100 mm.

SPEED (mm/sec): you can set the speed from a minimum of 10 mm/sec to a maximum of 500 mm/sec

ACCELERATION (mm/sec 2 ):
you can set
the acceleration from a minimum of 3 mm/sec 2 to a maximum
of 12 mm/sec
2