Olivetti 3D IoT, Руководство пользователя, Страница: 53 / 77

596806-02 User Manual 4-1
Chapter 4 – WI-FI CONNECTIONS
SETTING AND USING WI-FI CONNECTIONS
An Access Point is integrated in the 3D IoT printer, allowing wireless connections to be set up with devices such
as PCs, Tablets and smartphones (running either operating system, iOS or Android).
When the Wi-Fi key is selected from the Main Menu, the Wi-Fi Management menu appears:
Figure 4-1 Main Menu with Wi-Fi key
Figure 4-2 Wi-Fi menu
Pressing the
“Off” key in the Wi-Fi Menu, the related function is activated.
In the lower half of the display the following messages appear in sequence :

Wi-Fi Module booting

Wi-Fi module startup operations

SSID Scanning

searching for the Service Set IDentifier, that is, the 32-character alphanumeric key
identifying univocally the wireless network generated by the Access Point integrated in the printer

Starting AP Mode

starts the Wi-Fi Access Point functionality in Access Point (AP) mode.
At the end of these setup operations, the Wi-Fi module is ready.