Olivetti 3D IoT, Руководство пользователя, Страница: 31 / 77

596806-02 User Manual 2-11
8. Adjust the hot-end temperature to the correct operating value for the type of filament loaded (for example,
200°C for PLA).
To adjust the hot-end temperature:

from the Start menu, press on the RIGHT arrow of the T0 line until the required temperature value is
displayed.
Figure 2-16 Setting the temperature of the hot-end
9. Pass the filament inside the feeder unit and push it through for approximately 10 cm until it comes out of the
printing nozzle.
Figure 2-17 Inserting the filament into the hot-end
WARNING: During the first manual extrusion, you may find residual material from a preceding
printing process; this is normal because the machine is subjected to testing before being packaged.