Oliver LEGACY ELITE 2022, Руководство пользователя

Страница: 404 / 410

404
5
Press
BATTERY TYPE button
and
hold
for 3 seconds access battery type selection
mode, the battery type you select will be shown on the LCD meter, the default setting
is AGM Battery; the controller will automatically retain your battery type setting.
Caution: Incorrect battery type setting may damage your battery.
When the controller powers on, the unit will run self-qualify mode and automatically
show below items on LCD before going into charging process
Self-test starts, digital meter segments test
Software version test
Rated voltage and current test
External battery temperature sensor test (if connected)
Indicates the solar panel connected.
After going into charging process, the LCD displays the charging statues as below:
Press VOLT / AMP button in sequence, the LCD will display in turn with
Battery Voltage, Charging Current, Charged capacity (Amp-hour) and Battery
Temperature (if external temperature sensor connected)
Display in the daytime
Display during the night -
The VOLT / AMP button can be changed at any time during the charging process.
You also can visually monitor your battery charging condition for each battery; there is
a LCD bar to show the percentage of charge, indicating the battery is charged to 25%,
50%, 75% or 100%.
The LCD also can be treated as an independent voltage meter or thermometer.
A voltage less than 11.5V Volts indicates that the battery is discharged and requires
re-charging.
The unit has a 5-stage charging algorithm.
Soft Charge (Level 1) –Bulk Charge (Level 2)-Absorption charge (Level 3) –
Equalizing Charge* (Level 4) - Float Mode (Level 5)
CHARGING STAGES
ZAMP CHARGE CONTROLLER