Oliver LEGACY ELITE 2022, Руководство пользователя

Страница: 143 / 410

143
CRADLEPOINT WIRELESS WAN
©2017 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 106
User Manual / IBR900/IBR950 1/5/17
Administrator Password and Time Zone
Enter a password for the administrator who will have full
access to the router’s management interface.
You can use the default password on the back of your
product, or you can create a custom Administrator
Password.
Configuring Your Wireless Network
• Wireless Network Name - When you are browsing for
available wireless networks, this is the name that
will be broadcast from this router. This name is also
referred to as the SSID. For security purposes, it is
highly recommended you change the pre-configured
wireless network name.
• Enable Guest Network - If the guest network is
enabled, anyone can connect to the special guest
network which allows limited connectivity to the
Internet while preventing access to your local
network.
• Security Mode
• Best (WPA2) : Select this option if your wireless
adapters support WPA2-only mode. This will
connect to most new devices and is the most secure, but may not connect to older devices or some
handheld devices such as a PSP.
• Good (WPA1 & WPA2) : Select this option if your wireless adapters support WPA or WPA2. This is the
most compatible with modern devices and PCs.
• Poor (WEP) : Select this option if your wireless adapters only support WEP. This should only be used if
a legacy device that only supports WEP will be connected to the router. WEP is insecure and obsolete
and is only supported in the router for legacy reasons. The router cannot use 802.11n modes if WEP is
enabled; router WiFi performance and range will be limited.
• None (OPEN) : Select this option if you do not want to activate any security features.
SETUP WIZARDS
ECM REGISTRATION
To register the router with
Cradlepoint ECM you must first
have an account. If you need
to create an account you can
signup at
cradlepoint.com .
Once you’ve created an
account, or if you already have
one, you can enter your ECM
username and password to
register the router.
FIRST TIME SETUP