Oliver LEGACY ELITE 2022, Руководство пользователя

Страница: 346 / 410

346
XANTREX FREEDOM XC PRO INVERTER
Precautions When Working With Batteries
975-0799-01-01 ix
CAUTION
PHYSICAL INJURY HAZARD
This Freedom XC PRO Inverter/Charger is not intended for use by
persons (including children) with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the
appliance.
Failure to follow these instructions can result in injury or
equipment damage.
Precautions When Working With
Batteries
IMPORTANT : Battery work and maintenance must be done by
qualified personnel knowledgeable about batteries to ensure
compliance with battery handling and maintenance safety
precautions.
WARNING
BURN FROM HIGH SHORT-CIRCUIT CURRENT, FIRE
AND EXPLOSION FROM VENTED GASES HAZARDS
l
Always wear proper, non-absorbent gloves, complete eye
protection, and clothing protection. Avoid touching your
eyes and wiping your forehead while working near
batteries. See note #4.
l
Remove all personal metal items, like rings, bracelets, and
watches when working with batteries. See notes #5 and #6
below.
l
Never smoke or allow a spark or flame near the engine or
batteries.
l
Never charge a frozen battery.
l
Never charge a Lithium Ion type battery with an ambient of
0 °C (-32 °F) or colder.
Failure to follow these instructions can result in death, serious
injury, or equipment damage .
Regulatory
975-0799-01-01 xi
NOTICE
RISK OF INVERTER/CHARGER DAMAGE
n
Never allow battery acid to drip on the inverter/charger
when reading gravity, or filling battery.
n
Never place the Freedom XC PRO unit directly above
batteries; gases from a battery will corrode and damage
the inverter/charger.
n
Do not place a battery on top of the inverter/charger.
Failure to follow these instructions can result in equipment
damage.
Regulatory
The Freedom XC PRO inverter/charger is certified to appropriate
US and Canadian standards. For more information see
Regulatory approvals on page 98
.
The Freedom XC PRO inverter/charger is intended to be used for
mobile or commercial applications. This inverter/charger is
designed for marine applications only when additional drip
protection is installed in certain orientations. See the section on
Specifications for information.
FCC Information to the User
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC / CAN ICES-003 Class B Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
n
Reorient or relocate the receiving antenna.
n
Increase the separation between the equipment and
receiver.
n
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
n
Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Unauthorized changes or modifications to the equipment could
void the user’s authority to operate the equipment.