Oliver LEGACY ELITE 2022, Руководство пользователя

Страница: 105 / 410

105
CRADLEPOINT WIRELESS WAN
©2017 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 68
User Manual / IBR900/IBR950 1/5/17
• Above Normal
• High
• Higher
• Highest
Click Next to continue to the next page.
Download Bandwidth
Enable Download QoS : (Default: Enabled.) Deselect if you want your rule to apply to upload traffic only. Leave
this selected to include download restrictions with this queue.
Borrow Spare Bandwidth : (Default: Enabled.) When this is enabled, the interfaces/protocols associated with
this rule will borrow unused bandwidth from other rules. Disabling borrowing will restrict the traffic to the
specified bandwidth. Higher priority queues will be offered excess bandwidth first.
Download Bandwidth : This is the percentage of the connected WAN upload bandwidth that will be reserved for
the specified traffic. The maximum value is adjusted to the remaining percentage after other queues receive
their share.
Download Priority : The priority value has two different effects on traffic. Higher priority traffic is handled
before lower priority traffic, which can lead to shorter response times. Also, when spare bandwidth is available
it is offered to higher priority queues first. Move the slider to select from the following options (Default:
Normal):
•
Lowest
• Lower
• Below Normal
• Normal
• Above Normal
• High
• Higher
• Highest
Click Finish to save this queue.
Rules
A traffic shaping rule identifies a specific message flow and assigns that flow to one of the queues created
above.
Click
Add to create a new Traffic Shaping rule.
Traffic Shaping / QoS Rule Editor
The first page of the Traffic Shaping / QoS Rule Editor allows you enable/disable the rule, name the rule, specify
a protocol for the rule, and select a queue to associate the rule with.
Rule Enabled : (Default: Enabled.) Deselect this to disable this rule. This
can be useful for quickly changing configurations. If both upload QoS
and download QoS are disabled then the rule will disable automatically.
Rule Name : Create a name for the rule that is meaningful to you.
Protocol : The protocol used by the messages: TCP/UDP, TCP, UDP, or ICMP.
Select “Any” if your rule does not control a specific type of message that
uses a specific protocol.
Queue Name : Select a queue to associate this rule with.
Click Next to continue to the next page.