Oliver LEGACY ELITE 2022, Руководство пользователя

Страница: 134 / 410

134
CRADLEPOINT WIRELESS WAN
©2017 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 97
User Manual / IBR900/IBR950 1/5/17
SYSTEM LOGGING
Logging Level : Setting the log level controls which
messages are stored or filtered out. A log level of Debug
will record the most information while a log level of
Critical will only record the most urgent messages. Each
level includes all messages from all of the levels below
it on the list (e.g. “Warning” includes all “Error” and
“Critical” messages as well).
•
Debug
• Info
• Warning
• Error
• Critical
Enable Logging to a Syslog Server : Enabling this option
will send log messages to a specified Syslog server. After
enabling, type the Hostname or IP address of the Syslog
server (or select from the dropdown menu).
•
Syslog Server Address : Select the Hostname or IP address from the dropdown menu, or type this in
manually.
• Include System ID : This option will include the router’s “System ID” at the beginning of every log message.
This is often useful when a single remote Syslog server is handling logs for several routers.
• Include UTF8 Byte Order Mark : The log message is sent using UTF-8 encoding. By default the router will
attach the Unicode Byte Order Mark (BOM) to the Syslog message in compliance with the Syslog protocol,
RFC5424. Some Syslog servers may not fully support RFC5424 and will treat the BOM as ASCII text, which
will appear as garbled characters in the log. If this occurs, disable this option.
Log to attached USB stick : Only enable this option if instructed by a Cradlepoint support agent. This will write a
very verbose log file to the root level of an attached USB stick. Please disable the feature before removing the
USB stick, or you may lose some logging data.
Verbose modem logging : Only enable this option if instructed by a Cradlepoint support agent.
Create support log : This functionality allows for a quick collection of system logging. Create this log file when
instructed by a Cradlepoint support agent.
ROUTER SERVICES
By default, router services (Enterprise Cloud Manager,
NTP, etc.) connect to the router via the WAN. In some
setups it makes sense to use the LAN instead. For
example, if your router is used strictly for 3G/4G failover
behind another router, you may not want to use 3G/4G
data unnecessarily. Select
Use LAN Gateway to set your
router services to connect via the LAN.
LAN Gateway Address
: Input the IP address of the
LAN side connection. If this is a 3G/4G failover router
operating behind another router, the LAN Gateway
Address is the IP address of that other router.
DNS Server and Secondary DNS Server : The primary and secondary DNS server numbers match the static DNS
values (set at NETWORKING > DNS Servers ). You can leave the default values or set them manually here.
(Changing these values also changes the static DNS values.)