Oliver LEGACY ELITE 2022, Руководство пользователя

Страница: 138 / 410

138
CRADLEPOINT WIRELESS WAN
©2017 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 101
User Manual / IBR900/IBR950 1/5/17
• Set High/Router Running: In these modes the output pin is logic low while the router is booting and
transitions to logic high when the router is fully running. If the router is reset, the output returns to low
until the router has fully rebooted.
• Modem Connected: In this mode the output pin is logic low until the modem has connected to the tower. If
the connection drops, this output is set low until the connection is restored.
Hardware note: The output pin is an open collector/drain.
SNMP CONFIGURATION
SNMP, or Simple Network Management Protocol, is an Internet standard protocol for remote management. You
might use this instead of Enterprise Cloud Manager if you want to remotely manage a set of routers that include
both Cradlepoint and non-Cradlepoint products.
SNMP Configuration
• Enable SNMP : Selecting “Enable SNMP”
will reveal the router’s SNMP configuration
options.
Network Settings
• Enable SNMP on LAN : Enabling SNMP on LAN
will make SNMP services available on the
LAN networks provided by this router. SNMP
will not be available on guest or virtual
networks that do not have administrative
access.
• LAN port # : Use the LAN port # field to
configure the LAN port number you wish to
access SNMP services on. (Default: 161)
• Enable SNMP on WAN : Enabling SNMP on
WAN will make SNMP services available to
the WAN interfaces of the router.
• WAN port # : Use the WAN port # field to
configure which publicly accessible port you
wish to make SNMP services available on.
(Default: 161)
• SNMP Version
• SNMPv1 : SNMP version 1 is the most basic version of SNMP. SNMPv1 will configure the router to
transmit with settings compatible with SNMP version 1 protocols.
• SNMPv2c : SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will
configure the router to use settings and data formatting compatible with SNMP version 2c.
• SNMPv3 : SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure
setting for SNMP. If you wish to configure traps then you must use SNMP version 3.
SNMP v1 & v2c Settings
• Get community string : The “Get community string” is used to read SNMP information from the router. This
string is like a password that is transmitted in regular text with no protection.