Olicom CrossFire 8600, Руководство по эксплуатации

Страница: 167 / 250

151
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Monitoring the Network with the Console
Oper Mode
The port operation mode. Possible values are:
•
HDX port—Half-duplex mode in which only a dedicated connection to a
station is supported. The Tx/Rx pinouts are the same as a concentrator’s.
•
HDX station—Half-duplex mode in which the port operates like a station. The
connection may be dedicated or shared. The Tx/Rx pinouts are the same as an
adapter’s.
•
FDX port—Full-duplex mode in which only a dedicated connection to a
station is supported. The Tx/Rx pinouts are the same as a concentrator’s.
•
FDX station—Full-duplex mode in which the port operates like a station. The
connection may be dedicated or shared. The Tx/Rx pinouts are the same as an
adapter’s.
•
RI—Ring In. On CrossFire 8600, only displayed for ports 19 and 20. On
CrossFire 8605 for all 20 fiber ports.
•
RO—Ring Out. On CrossFire 8600, only displayed for ports 19 and 20. On
CrossFire 8605 for all 20 fiber ports.
•
RI/RO—Ring-in/ring-out mode. On CrossFire 8600, only displayed for ports
19 and 20. On CrossFire 8605 for all 20 fiber ports.
•
Passive - this value will be displayed if the port is selected as a passive
monitoring port on the Switched Port Analyzer configuration screen.
Fwd Mode
The forwarding mode that will be used for transmit. Possible values are:
•
Cut-Thru—cut-through
•
Store-Fwd—store-and-forward
For ports operating at a speed of 4 Mbps, the only possible mode is store-and-
forward.