Olec Accuprint AP30-5000, Руководство по обслуживанию, Страница: 52 / 138

9-2 94MS36 Rev. F2 S/W Ver 2.06
screws through the hinge into the frame make sure the frame is
1
/
32
" to
1
/
16
" above the top of the hinge to avoid the possibility of damaging the
glass, then tighten them down.
End View
Bar
Hinge
Outer
Frame
Allen
Screw
1/32"
to
1/16"
• Loosen all the Allen head screws in the corners of the inner and outer
frames shown in the diagram.
• Tighten the outer frame Allen head screws in the order shown in the
diagram, 2 per corner.
• Tighten the inner frame Allen head screws in the order shown in the
diagram, 4 per corner.
3
7
8
4
1
5
6
2
• Lift the frame and push the gas shocks back onto the ball joints.
• Reinstall the safety clips into the ends of the gas shocks.