Olec Accuprint AP30-5000, Руководство по обслуживанию, Страница: 21 / 138

94MS36 Rev. F2 S/W Ver 2.06 3-3
Setting or Changing your Lock Code feature
Note: If you are setting the code you must know the existing code.
Note: Lock Level must be set to 0 to program this step and reset when
finished see Lock Level feature.
• Press the
P
key on the integrator to power up the light, the front remote
switches, and the exposure unit's computer system.
[SEL_]
Press
1,2,3t 4
in sequence. The Vacuum window will read
[SEL_]
. This places you in the select mode.
• Press the
Y
key once. The Memory window will read
[Su]
.
[codE]
Press and release the
e
key until the Exposure window reads
[codE]
.
• Press the
V
key the Memory and Exposure windows will dim. Enter
your new 3 digit code
• Press the
V
key to set entry.
• Press the
0
key twice to exit this mode.
To Clear Lamp Statistics
!
C
This step clears all lamp statistics explained in sections Lamp Statistics.
Note: You can abort clearing the lamp statistics by pressing the
0
key
before the display counts down to
[SEL_]
and you will not change
any memory and exposure statistics.
Note: Lock Level must be set to 0 to program this step and reset when
finished, see Lock Level feature.
• Press the
P
key on the integrator to power up the light, the front remote
switches, and the exposure unit's computer system.
[SEL_]
Press
1,2,3t 4
in sequence. The Vacuum window will read
[SEL_]
. This places you in the select mode.
• Press the
7
key five (5) times.
• Press the
0
key once to exit this mode.
To Clear Memory and Exposure Statistics
!
C
This step clears all information stored in the memory.
Note: You can abort clearing the memory by pressing the
0
key before
the display counts down to
[SEL_]
and you will not change any
memory and exposure statistics.