Page: 41
Service Guide OL830
Chapter 3 Maintenance & Disassembly
3.2.02 AppleTalk/Serial Interface Board (APSR) (Option)
1. Remove the upper cover.
(See 3.2.01){
}
2. Remove the two screws (1).
3. Pull outward slightly on the two flanges (2) on shield plate B (3), releasing the two small
tabs (4).
4. Lift out the interface board.
NOTE:
When installing the interface board, make sure that the board is under the tabs (4).
P/N 55058001 OL830 AppleTalk/Serial Interface Board
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
