Page: 47
Service Guide OL830
Chapter 3 Maintenance & Disassembly
3.3.01 Actual Page Count
The actual page counter counts the number of sheets printed by the printer. The value of the
actual page counter will be displayed as listed below.
1. Power ON the printer while pressing Switch 1 on the engine controller board. The LED (located on the
engine controller board) will flash once - then pause (the LED will continuously
flash once - then
pause) indicating that the printer is in Parameter 1 of the maintenance mode.
2. Press Switch 1 for five seconds. The LED will display the contents of the Parameter 1 register (Actual
Page Counter) as listed below.
The long flash indicates start of count.
Short flashes indicate counter contents (most significant digit first).
(There will be a pause between digits)
Upon completion of the count, a long flash will indicate start of count. This process will loop until you
press Switch 1 for five seconds (this will cause the modified page count to be displayed
(refer to
3.3.02){
}
Example
Actual Page Counter = 235 pages
Switch 1 Action
LED Display
Description
Press at Power
ON
Flashes ON/OFF
Parameter #1 -
Selected
Press for five
seconds
Long Flash
Start of Count
None
On-Off-On-Pause
1st Digit = 2
None
On-Off-On-Off-On-Pause
2nd Digit = 3
None
On-Off-On-Off-On-Off-On
-Off-On-Pause<P11.5M>
3rd Digit = 5
None
Long Flash
Start of Count
