Page: 83
Service Guide OL830
Chapter 4 Failure & Repair Analysis
RAP 09: Loop Test Failure (RS232-C) - Emulation Mode
START
Is the loop test connector installed?
NO Install the loop test connector (refer to the Solutions Guide for wiring)
YES Replace the interface board (option).
Is the problem solved?
NO Replace the main controller board.
YES END
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)