If the display
does not change
replace the cover
open microswitch
or the LLAB-2
board
Feed Jam
Errors
PAPER FEED JAM n
A jam occurred in
the cassette
section. The top
of the paper
failed to reach
the inlet sensor
within a few
seconds after the
activation of the
hopping roller
(attempted three
times). The inlet
sensor was
activated during
power ON.
Open the cover
and remove the
jam then close
the cover
^
Refer to RAP 02
Connection
Error
or No Display
Displayed over 30
seconds.
Connection error
or Operator panel
malfunction.
Refer to RAP 01
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
