Oki PRO330S, Руководство пользователя

Страница: 107 / 140

- 107 -
Output position shifts
Symptom Cause Solution
Reference
page(s)
The output position
of the front edge
shifts.
The gap between labels varies
from label to label.
Labels with different gaps within one
roll cannot be used. Use labels with
regular gaps within one roll.
Page 59
There is a seam on the roll
paper.
If there is a seam on the roll paper,
the output position of the front edge
may shift.
A medium with a joint cannot be
used.
Page 54
The paper size set in the printer
driver is different from the size
of the paper loaded.
Specify a correct paper size in the
printer driver.
Page 81
The position of the black mark
sensor or the gap sensor is
misaligned.
Adjust the sensor position according
to the paper form.
Page 68
It is exposed from
the rear edge of the
paper
The paper size set in the printer
driver is different from the size
of the paper loaded.
Specify a correct paper size in the
printer driver.
Page 81
The rightmost
output position is
misaligned.
The position of the paper
is misaligned during paper
transfer.
There are two types of solutions, so
select the appropriate one according
to the usage.
1. Make fine adjustments to the
printing position on the paper from
the menu on the operator panel.
2. Readjust the paper guide on the
printer and the paper guide on the
roll paper holder.
Page 73