132
•
Para mudar do modo
de dispensa para o modo
contínuo
Levante a alavanca de
troca e deslize a unidade
dispensadora até que pare .
Como ligar a impressora
Depois de concluir o procedimento descrito
anteriormente, tente ligar e desligar a impressora .
➊
Mantenha o botão
POWER pressionado .
Quando o LED
STATUS acender na
cor verde, solte o
botão .
➋
Mantenha o botão
POWER pressionado
novamente . Quando o
LED STATUS apagar,
solte o botão .
Before Starting
4
28
Turning Printer On
5
29
5. Turning Printer On
After the procedure mentioned before has been finished, try
to turn the printer power on and off.
1
Press and hold the
POWER key. When the
STATUS LED lights
green, release the key.
2
Press and hold the
POWER key again.
When he STATUS LED
goes off, release the
key..
POWER
FEED
POWER
FEED
5
Close the cover after
confirming that the
leading edge of the
label is outside the
printer (more than 10
mm).
When using a non-separate
label, press FEED key to
feed a piece of label and pull
the label upward to cut it
along the perforation.
If the label is jammed, retry
label setting procedure.
6
Slide the dispenser unit
until it stops.
This completes the label setting in the Dispense mode.
•
To changing Dispense mode to continuous
mode
Lifting the change lever,
slide the dispenser unit
until stops.
Before Starting
4
28
Turning Printer On
5
29
5. Turning Printer On
After the procedure mentioned before has been finished, try
to turn the printer power on and off.
1
Press and hold the
POWER key. When the
STATUS LED lights
green, release the key.
2
Press and hold the
POWER key again.
When he STATUS LED
goes off, release the
key..
POWER
FEED
POWER
FEED
5
Close the cover after
confirming that the
leading edge of the
label is outside the
printer (more than 10
mm).
When using a non-separate
label, press FEED key to
feed a piece of label and pull
the label upward to cut it
along the perforation.
If the label is jammed, retry
label setting procedure.
6
Slide the dispenser unit
until it stops.
This completes the label setting in the Dispense mode.
•
To changing Dispense mode to continuous
mode
Lifting the change lever,
slide the dispenser unit
until stops.
Before Starting
4
28
Turning Printer On
5
29
5. Turning Printer On
After the procedure mentioned before has been finished, try
to turn the printer power on and off.
1
Press and hold the
POWER key. When the
STATUS LED lights
green, release the key.
2
Press and hold the
POWER key again.
When he STATUS LED
goes off, release the
key..
POWER
FEED
POWER
FEED
5
Close the cover after
confirming that the
leading edge of the
label is outside the
printer (more than 10
mm).
When using a non-separate
label, press FEED key to
feed a piece of label and pull
the label upward to cut it
along the perforation.
If the label is jammed, retry
label setting procedure.
6
Slide the dispenser unit
until it stops.
This completes the label setting in the Dispense mode.
•
To changing Dispense mode to continuous
mode
Lifting the change lever,
slide the dispenser unit
until stops.
Содержание LP441b
