Oki LP441b, Руководство пользователя

Страница: 127 / 152

127
Colocação de etiquetas
O método de colocação das etiquetas pode variar
dependendo do modo de impressão .
Before Starting
4
25
Before Starting
4
24
3
Open the label guide
adjust dial cover and
turn the dial till the
label guide fits with
label roll.
Turn the label roll lightly by
the hand and confirm that it
rotates smoothly.
If a drags is felt, paper may
not be fed correctly. Return
the dial for adjustment.
When using the paper of the
same width as that used
previously, adjustment of the
label guide is not necessary.
4
Close the cover after
confirming that the
leading edge of the
label is outside the
printer.
This completes the label setting in continuous mode.
Label leading edge
Label guide
adjust dial
Etiquetas Diário
Modo contínuo
(Ver a figura na página 29) .
➊
Puxe a alavanca de abrir/
fechar a tampa na direção
da seta para abrir a tampa .
Se a impressora estiver sendo
usada no modo de dispensa,
levante a alavanca de troca e
deslize a unidade dispensadora
até que pare (ver página 19) .
➋
Coloque as etiquetas na
impressora .
Preste atenção à direção do rolo de
etiquetas .
Before Starting
4
25
Before Starting
4
24
3
Open the label guide
adjust dial cover and
turn the dial till the
label guide fits with
label roll.
Turn the label roll lightly by
the hand and confirm that it
rotates smoothly.
If a drags is felt, paper may
not be fed correctly. Return
the dial for adjustment.
When using the paper of the
same width as that used
previously, adjustment of the
label guide is not necessary.
4
Close the cover after
confirming that the
leading edge of the
label is outside the
printer.
This completes the label setting in continuous mode.
Label leading edge
Label guide
adjust dial
Setting Labels
The method of setting label may vary depending on the print
mode.
Continuous mode
1
Slide the Cover Open/
Close lever in the
direction of arrow to
open the cover.
If you are using the printer in
Dispense mode, lifting the
change lever, slide the
dispenser unit until stops
(see Page 28).
2
Place the label to the
printer.
Pay attention to the direction
of the label roll.
Labels Journal
(See figure in page 47.)
Before Starting
4
25
Before Starting
4
24
3
Open the label guide
adjust dial cover and
turn the dial till the
label guide fits with
label roll.
Turn the label roll lightly by
the hand and confirm that it
rotates smoothly.
If a drags is felt, paper may
not be fed correctly. Return
the dial for adjustment.
When using the paper of the
same width as that used
previously, adjustment of the
label guide is not necessary.
4
Close the cover after
confirming that the
leading edge of the
label is outside the
printer.
This completes the label setting in continuous mode.
Label leading edge
Label guide
adjust dial
Setting Labels
The method of setting label may vary depending on the print
mode.
Continuous mode
1
Slide the Cover Open/
Close lever in the
direction of arrow to
open the cover.
If you are using the printer in
Dispense mode, lifting the
change lever, slide the
dispenser unit until stops
(see Page 28).
2
Place the label to the
printer.
Pay attention to the direction
of the label roll.
Labels Journal
(See figure in page 47.)