Oki LP441b, Руководство пользователя

Страница: 63 / 152

63
Utilisation de l’interface IrDA
Effectuez la procédure suivante pour imprimer en utilisant
l’interface IrDA .
➊
Placez l’imprimante à une distance de 20 cm ou moins
de l’ordinateur ou du terminal pour permettre les
communications avec l’imprimante par l’entremise de
l’interface IrDA .
➋
Réglez la position de l’imprimante pour permettre à
l’ordinateur ou au terminal d’être situé dans les 30˚
du centre du filtre IrDA (zone conique montrée ci-
dessous) .
Using Bluetooth Interface or Wireless LAN
Interface
9
33
U
sin
g
IrD
A
In
te
rfa
ce
8
32
The distance available for IrDA
communication is a maximum of 15 to 20 cm.
* This distance may vary depending on the
environment of use or the party to
communicate with. Especially under direct
sun light or in the environment exposed to
strong illumination, communication may be
disabled. In such a case, block the strong
light not to enter the IrDA filter or make the
PC contact the IrDA filter.
9. Using Bluetooth Interface
or Wireless LAN Interface
Note that when printing with Bluetooth interface or wireless
LAN interface, the distance between the printer and the host
may differ depending on the environment of use and the
performance of the PC or handy terminal used.
8. Using IrDA Interface
Use the following procedure to print through IrDA interface.
1
Place the printer within the distance of 20 cm from the
PC or handy terminal to communicate through IrDA.
2
Adjust the printer position to let the PC or the handy
terminal in the range of 30˚ from the center of the IrDA
filter (a corn area shown below).
30°
30°