Oki LP441b, Руководство пользователя

Страница: 93 / 152

93
➎
Cierre la tapa después de
verificar que el punto de
inserción de la etiqueta
está por fuera de la
impresora (más de 10 mm) .
Cuando utiliza etiquetas con
perforación, pulse el botón de
ALIMENTACIÓN para alimentar
una etiqueta y hale la etiqueta hacia arriba para cortarla por la línea
perforada .
Si la etiqueta está atascada, siga nuevamente las instrucciones
para colocar el rollo de etiquetas .
➏
Gire el dispensador
hasta que se detenga .
Esta es toda la configuración necesaria para imprimir en
modo dispensador .
• Cómo cambiar del modo dispensador al modo
continuo
Al levantar la palanca de cambio,
deslice la unidad dispensadora
hasta que se detenga .
Before Starting
4
28
Turning Printer On
5
29
5. Turning Printer On
After the procedure mentioned before has been finished, try
to turn the printer power on and off.
1
Press and hold the
POWER key. When the
STATUS LED lights
green, release the key.
2
Press and hold the
POWER key again.
When he STATUS LED
goes off, release the
key..
POWER
PRINT
FEED
POWER
PRINT
FEED
5
Close the cover after
confirming that the
leading edge of the
label is outside the
printer (more than 10
mm).
When using a non-separate
label, press FEED key to
feed a piece of label and pull
the label upward to cut it
along the perforation.
If the label is jammed, retry
label setting procedure.
6
Slide the dispenser unit
until it stops.
This completes the label setting in the Dispense mode.
•
To changing Dispense mode to continuous
mode
Lifting the change lever,
slide the dispenser unit
until stops.
Punto de inserción de la
etiqueta
Before Starting
4
28
Turning Printer On
5
29
5. Turning Printer On
After the procedure mentioned before has been finished, try
to turn the printer power on and off.
1
Press and hold the
POWER key. When the
STATUS LED lights
green, release the key.
2
Press and hold the
POWER key again.
When he STATUS LED
goes off, release the
key..
POWER
PRINT
FEED
POWER
PRINT
FEED
5
Close the cover after
confirming that the
leading edge of the
label is outside the
printer (more than 10
mm).
When using a non-separate
label, press FEED key to
feed a piece of label and pull
the label upward to cut it
along the perforation.
If the label is jammed, retry
label setting procedure.
6
Slide the dispenser unit
until it stops.
This completes the label setting in the Dispense mode.
•
To changing Dispense mode to continuous
mode
Lifting the change lever,
slide the dispenser unit
until stops.
Before Starting
4
28
Turning Printer On
5
29
5. Turning Printer On
After the procedure mentioned before has been finished, try
to turn the printer power on and off.
1
Press and hold the
POWER key. When the
STATUS LED lights
green, release the key.
2
Press and hold the
POWER key again.
When he STATUS LED
goes off, release the
key..
POWER
PRINT
FEED
POWER
PRINT
FEED
5
Close the cover after
confirming that the
leading edge of the
label is outside the
printer (more than 10
mm).
When using a non-separate
label, press FEED key to
feed a piece of label and pull
the label upward to cut it
along the perforation.
If the label is jammed, retry
label setting procedure.
6
Slide the dispenser unit
until it stops.
This completes the label setting in the Dispense mode.
•
To changing Dispense mode to continuous
mode
Lifting the change lever,
slide the dispenser unit
until stops.