Oki LP441b, Руководство пользователя

Страница: 24 / 152

24
Using RS-232C Interface
Use the following procedure to print by connecting to a
PC or a handy terminal through an RS-232C cable option .
➊
Open the RS-232C
cover .
➋
Plug one end of
the RS-232C cable
into the connector
firmly .
Be sure that the arrow
mark on the connector
of the RS-232C cable
matches with the arrow
mark by the side of the
printer connector .
➌
Plug the other
end of the RS-
232C cable to
the connector of
the PC or handy
terminal .
For the information on
the connector of the PC
or handy terminal, refer to the manual supplied with the PC .
Test
Printing
6
30
Using
RS-232C
Interface
7
31
6. Test Printing
1
Pressing and holding
the FEED key, set the
POWER key . The
printer enters the test
mode. Press the FEED
key again to start test
printing.
2
Verify the following
using the output of the
test printing.
• There is no chipped
character.
• P rint condition is
good.
In the test printing, the battery residual is indicted by
� � �
(
� � �
for full charge).
When the battery indicates
� � �
, charge the battery.
* If any fault is detected, contact the store you bought the printer, dealer, or
service center.
Before asking for a repair, please read “Before Asking for a Repair” on
page 58.
POWER
PRINT
FEED
1
2
123456
7
abcdefg
1234567
abcdefg
123456
7
abcde
fg
RS-232C cover
RS-232C cable