![background image](http://html1.mh-extra.com/html/oki/c910/c910_service-training_4104261025.webp)
21
19. Removing the Eject-Assy.
(Exit Guide)
19.1. Release the five
tabs with a flat
blade screwdriver
– the two tabs on
the end of the
cover first – and
reach under the
area marked with
the Red arrow and
press to release
latches. Gently
pivot the cover up
to remove.
NOTE
: Do Not Pull cover
outlined in the Yellow oval
area! Damage is sure to
occur if you do!
19.2. Unplug
connector
at upper right of
the OR-S2R (exit
sensor board).
Содержание C910
Страница 4: ...This Page Is Intentionally Blank IV...
Страница 16: ...13 4 Remove the Op Panel Cover 13 5 Remove 1 screw 13 6 Gently unplug the ribbon cable 12...
Страница 22: ...16 8 Slide the Controller Board slightly to the right and remove 17 Removing the Engine Board 18...
Страница 40: ...26 Removing the Paper Feed Unit 26 1 Remove four screws and remove the Metal Right Side Cover 36...