![background image](http://html1.mh-extra.com/html/oki/c910/c910_service-training_4104261044.webp)
29. Removing Motor-DC(ID)
(Drum Motors)
29.1. Remove
two
screws and unplug
the connector from
the OR-S2M(Motor
Driver Board) and
not from the motor
assembly.
NOTE
: Each of the four
motors is mounted with two
screws. Also, the Black ID
motor is mounted at a 90°
angle to the other three.
The 4 drum motors are
interchangeable.
When you reassemble the
printer make sure that you
hold the motor(s) securely
when you are installing the
holding screws. Also make
sure that the screws are
completely screwed down.
40
Содержание C910
Страница 4: ...This Page Is Intentionally Blank IV...
Страница 16: ...13 4 Remove the Op Panel Cover 13 5 Remove 1 screw 13 6 Gently unplug the ribbon cable 12...
Страница 22: ...16 8 Slide the Controller Board slightly to the right and remove 17 Removing the Engine Board 18...
Страница 40: ...26 Removing the Paper Feed Unit 26 1 Remove four screws and remove the Metal Right Side Cover 36...