![background image](http://html1.mh-extra.com/html/oki/c910/c910_service-training_4104261046.webp)
31. Removing Motor-
Pulse(Toner Shutter) aka
Toner Supply Motor.
31.1. Using a flat blade
screwdriver, push
up to release the
tab.
NOTE
: Both the motors
and the mounting plates
are the same however
the motors are mounted
to the plates 180°
opposite of each other.
Be aware of this for
reassembly.
42
Содержание C910
Страница 4: ...This Page Is Intentionally Blank IV...
Страница 16: ...13 4 Remove the Op Panel Cover 13 5 Remove 1 screw 13 6 Gently unplug the ribbon cable 12...
Страница 22: ...16 8 Slide the Controller Board slightly to the right and remove 17 Removing the Engine Board 18...
Страница 40: ...26 Removing the Paper Feed Unit 26 1 Remove four screws and remove the Metal Right Side Cover 36...