![background image](http://html1.mh-extra.com/html/oki/c910/c910_service-training_4104261031.webp)
21.3. Remove
eight
screws – seven
inside the printer
(arrows) and one
on the front
(circled).
NOTE
: During reassembly,
don’t forget to reinstall the
screw through the front of the
chassis – it’s a step many
technicians forget!
21.4. A flat blade
screwdriver may
be required to pry
the side plate
away from the
frame at the front
of the printer.
Once done, lift the
Sensor-
Registration Assy.
up to remove and
while doing so,
unplug the two
connectors as
shown.
27
Содержание C910
Страница 4: ...This Page Is Intentionally Blank IV...
Страница 16: ...13 4 Remove the Op Panel Cover 13 5 Remove 1 screw 13 6 Gently unplug the ribbon cable 12...
Страница 22: ...16 8 Slide the Controller Board slightly to the right and remove 17 Removing the Engine Board 18...
Страница 40: ...26 Removing the Paper Feed Unit 26 1 Remove four screws and remove the Metal Right Side Cover 36...