manualshive.com logo in svg

Oki C5550, Руководство по обслуживанию, Страница: 256 / 313

Поделиться
Скачать
Oki C5550 Скачать руководство пользователя страница 256

Oki  Data  CONFIDENTIAL

44158801TH  Rev.2 

256 / 

8.5.2.(13) 

Option unit is not recognized

(13-1)  Duplex unit is not recognized

Confirmation Items

Confirmation Tasks

Action at NG

(13-1-1)  Duplex PCB

Duplex unit

 Check to see if the duplex unit in use conforms to the 
MC560 specification (A unit conforming to the C3200/
C5540/C5510/C5450/C5250/C3100/ML3100/C5200/
ML5200/C5100/ML5100/C5300/ML5300 specification 
cannot be connected).

 Replace the Duplex 
unit.

(13-1-2)  Check of connections

Connections from PU PCB 
(PRF PCB) to duplex PCB 
(V7Y PCB).

Check to make sure that the cord is properly connected 
from the DU connector of the PU PCB (PRF PCB) to the 
duplex PCB.

Correct the 
connections.

Square connector 
connecting the duplex unit 
to the printer

Check to see if there is any foreign matter trapped in the 
connecting part of the square connector

Remove the foreign 
matter.

Square connector 
connecting the duplex unit 
to the printer

Check to see if the pins of the square connector are 
broken.

Replace the 
connector.

(13-1-3)  Check of control signal

Signal delivered from PU 
PCB (PRF PCB) to duplex 
(V7Y PCB)

Check the signal delivered through the OPTLPN 
connector of the PU PCB (PRF PCB).

Pin 6: TXD (PU 

 DUP)

Pin 4: RXD (DUP 

 PU)

 Replace the PU 
PCB (PRF PCB).

(13-2)  2nd Tray unit is not recognized

Confirmation Items

Confirmation Tasks

Action at NG

(13-2-1)  2nd tray PCB

2nd tray unit

Check to see if the 2nd tray unit in use conforms to the 
MC560 specification (A unit conforming to the C5800n/
C3200/C5540/C5510/C5450/C5250/C3100/ML3100/
C5200/ML5200/C5100/ML5100/C5300/ML5300 
specification cannot be connected).

Replace the 2nd tray 
unit.

(13-2-2)  Check of connections

Connections from PU PCB 
(PRF PCB) to 2nd tray 
PCB (V7Y PCB)

Check to make sure that the cord is properly connected 
from the 2nd connector of the PU PCB (PRF PCB) to the 
2nd tray PCB.

Correct the 
connections.

Correct the connections.

Check to see if there is any foreign matter trapped in the 
connecting part of the square connector.

Remove the foreign 
matter.

Square connector 
connecting the 2nd tray 
unit to the printer

Check to see if the pins of the square connector are 
broken.

Replace the 
connector.

(13-2-3)  Check of control signal

Signal delivered from PU 
PCB (PRF PCB) to 2nd 
tray PCB (V7Y PCB)

Check the signal delivered through the 2nd connector of 
the PU PCB (PRF PCB).

Pin 5: TXD (PU 

 2nd)

Pin 3: RXD (2nd 

 PU)

 Replace the PU 
PCB (PRF PCB).

Содержание C5550


























































































































































































































































































































Отзывы:

Нет отзывов