manualshive.com logo in svg

Oki C5550, Руководство по обслуживанию, Страница: 198 / 313

Поделиться
Скачать
Oki C5550 Скачать руководство пользователя страница 198

Oki  Data  CONFIDENTIAL

44158801TH  Rev.2 

198 / 

7. 

PERIODICAL MAINTENANCE

7.1 

Recommended replacement parts

Oki Data recommends that heavy users only replace the following parts. (If those parts are not 
replaced, the print quality is not guaranteed, and malfunctions may even result.)

Parts Name

Friction Pad Assy

42088801

Roller Assy. Hopping

43334901

Parts are replaced periodically by users.

7.2 

Cleaning

Clean the interior and outside of the printer, as needed, using a waste cloth and small vacuum 
cleaner. 

Note!

  Be careful not to touch the image drum terminals, LED lens array and LED head 

connectors.  

7.3 

Cleaning of LED lens array

If  a  vertical  white  band  or  white  stripe  (partial  print,  light  print)  is  observed  in  the  print  face, 
clean the LED lens array.

Note!

  To clean the LED lens array, be sure to use a soft cloth.

White band, white stripe
(Void or light printing)

Note!

  1.  Consumable parts (Image drums, toner cartridge, fuser unit, belt unit) are not 

included.

 

2.  Power supply, PU PCB, CU PCB and other PCBs are not included.

Содержание C5550


























































































































































































































































































































Отзывы:

Нет отзывов