manualshive.com logo in svg

Oki C5550, Руководство по обслуживанию, Страница: 184 / 313

Поделиться
Скачать
Oki C5550 Скачать руководство пользователя страница 184

Oki  Data  CONFIDENTIAL

44158801TH  Rev.2 

184 / 

LCD (English) 

(  means no display in upper line)

Ready

LED

Attention

LED

Description

Level

 

%TRAY% EMPTY

Varies

On

%TRAY%: The tray is empty. Treated as Warning until 
printing to the empty tray is designated. 
In this case, Leisus I/F : corresponding bits of both 
LFTERR and LFTERR2 should be '0'. 
    Tray1 
    Tray2

Warning

 

HARD DISK FULL

Varies

On

Disk-full is occurring. Because this is a temporary 
warning, it remains until the end of the job and 
disappears. 

Warning

 

DISK WRITE DISABLED

Varies

On

An attempt to write in a read-only file was done. 
Because this is a temporary warning, it remains until 
the end of the job and disappears.

Warning

 

COLLATE FAIL

Varies Varies Memory overflow was occurred in the collate copy. 

Stays displayed until the ONLINE key is pressed.

Warning

 

JOB LOG NOT AVAILABLE

Varies

On

Indicates that the storage device (HDD) for executing 
PRINT STATISTICS SYSTEM does not exist. 
(Appears when JobAccounting is in operation without 
HDD.)

Warning

 

JOB LOG. DISK FULL

Varies

On

Indicates that the free space of the storage device is 
too small to execute PRINT STATISTICS SYSTEM.

Warning

 

INVALID ID. JOB REJECTED

Varies

On

Notifies users that jobs have been cancelled because 
they are not permitted for printing. (Related to 
JobAccount).  Stays displayed until the ON LINE key 
is pressed.

Warning

 

LOG BUFFER FULL. JOB RE-
JECTED

Varies

On

Notifies users that jobs have been cancelled because 
the buffer is full.  (Related to JobAccount.)Stays 
displayed until the ON LINE key is pressed.

Warning

 

FILE ERASING

Varies

On

Indicates that a secret file is being erased. 

Warning

 

DELETING ENCRYPTED JOB

Varies

On

It indicares the deletion of encrypted authentication 
print job and saving of deletion request of file.  

Warning

 

ERASED DATA FULL

Varies

On

Indicates that a secret file waiting to be erased is full.

Warning

 

EXPIRED SECURE JOB

Varies

On

Indicates that an applicable job has been 
automatically deleted as the retention period for 
authentication printing has expired.

Warning

Содержание C5550


























































































































































































































































































































Отзывы:

Нет отзывов