manualshive.com logo in svg

Oki C5550, Руководство по обслуживанию, Страница: 201 / 313

Поделиться
Скачать
Oki C5550 Скачать руководство пользователя страница 201

Oki  Data  CONFIDENTIAL

44158801TH  Rev.2 

201 / 

7.5 

Internal cleaning of printer 

Cleaning the interior of the printer. 

Depending on the print pattern, toner may adhere to the metal shaft located between the fuser 
unit and the cyan image drum cartridge. Execute this cleaning if the metal shaft has an adher-
ence of toner. 

(1)  Turn OFF the power of the printer.

O

I

(2)  Open the top cover by pressing the OPEN button.

Personal injuries may occur.

The fuser unit is extremely hot. Do not touch it.

OPEN button

(3)  Take out the image drum cartridges

1.  Take out the four image drum cartridges and place them on a flat-top table.
2.  After taking out the image drum cartridges, cover them with a black sheet of paper.

Note!

 

•

 The image drums (green tubular parts) are extremely vulnerable. Use good 

caution in handling them. 

 

•

 Do not expose the image drum cartridges to direct sun or intense light (over 

approximately 1500 luxes). Even under the inside lighting, do not leave them 
exposed for five minutes or longer. 

Содержание C5550


























































































































































































































































































































Отзывы:

Нет отзывов