Oilon GKP-350 M, Руководство по эксплуатации и обслуживанию

Страница: 38 / 134

When using any other oil pump pressure as shown in table, the throughput of nozzle is:
A x
P2
P1
PAINEKAAVA1 ver. 2
A = Table value
P1 = 20 bar (Fluidics)
P2 = Oil pump pressure
For example: nozzle 12-W1 No. 100, oil pump pressure 30 bar (3,0 MPa) ⇒ throughput
of nozzle is:
100 kg/h x
30 bar
20 bar
~
~ 122 kg/h
Max.
PAINEKAAVA2 ver. 2
Calculated minimum output on return pressure 9 - 12 bar is:
Min =
Max kg/h
2,5
PAINEKAAVA4 ver. 2
Oil pump operating pressure (atomizing pressure) in heavy fuel oil is 2500 - 3000 kPa
(25 - 30 bar).
Oil pump operating pressure (atomizing pressure) in light fuel oil is 2000 - 2500 kPa
(20 - 25 bar).
Spill return nozzle Fluidics 12-W2
Table is applicable when atomizing viscosity is 5 mm²/s (cSt).
Nozzle No. Max. throughput kg/h at oil pump pressure of
25 bar (2,5 MPa) when return line is closed
Min. throughput kg/h at oil
pump pressure of 25 bar (2,5
MPa) when return line pressure
is 7 - 10 bar (0,7 - 1,0 MPa)
40 40 10
50 50 12
60 60 15
70 70 18
80 80 20
90 90 22
100 100 25
112 112 28
125 125 31
140 140 35
160 160 40
36 (129) M5178 1647EN