OHTAKE OM-26M, Руководство по эксплуатации

Страница: 19 / 44

－
18
－
７－２．
Replacing and adjustment of the escaper
Holding plate
Escaper
Stopper
assembly
Escaper guide-right
Stopper
①
Start by removing, in this order, the escaper guide-right
--> escaper --> stopper assembly.
Loosen the attaching screws of the escaper guide-right and the
escaper and remove them.
Front sensor
Spacer
Spacer fixing screw
Names of the parts
Turn OFF the power switch before replacing.
Turn ON the power switch when adjustments are necessary.
Before replacing, remove all the screws from the hopper, the
rail, and the escaper.
R e m o v e t h e e s c a p e r
guide-right.
Remove the escaper.
When using screws with a different diameter, replace the escaper,
the stopper assembly, the escaper guide-right, the rail and the
passing plate.
First, remove the bit guide bracket attaching plate and then replace
and adjust the parts.
After replacement, be sure to adjust and check the parts in the area
of the escaper.
When you remove the escaper attaching screw, please use the driver
specified for M2 (bit No.0).