Ohmeda Ohio Care Plus, Инструкция по эксплуатации, обслуживанию и монтажу

Страница: 16 / 68

1/Introduction
1-2 1-2
Description
The Ohio Care Plus Servo-controlled Humidifier uses a heating element in a water
tray under the incubator to provide humidification. An electronic controller adjacent
to the water tray uses a microprocessor to control the heating element. The heating
element produces warm water vapor and opens a valve that releases that vapor into
the incubator patient chamber.
The desired humidity level is entered on a control panel on the front of the humidifier.
The controller compares relative humidity readings from a sensor located inside the
patient chamber of the incubator to this set humidity, and regulates the heater and
valve to maintain the desired humidity.
Figure 1-1
Care Plus Servo-controlled Humidifier
Humidity
sensor
Control
panel
Controller
housing
Fill tray
Fuses
On/Off
switch
Power inlet
Fill tray
CI.18.015
CI.18.016