EN-24
Adventurer SL
Set the LSD
When LSD is displayed, press
Yes
to go to
LSD settings, or
No
to exit.
LSD settings are SET 1, SET 2, SET 5, SET 10, SET 100 or SET 0.5.
When a setting displays. press
No
to go to the next setting.
Press
Yes
to accept a setting and exit.
End Unit
When END UNIT is displayed, press
Yes
to
exit the Unit Sub-menu and go to the End Sub-
menu, or press
No
to return to
the first Menu Item in the Unit Sub-menu.
3.5.5 End Sub-menu
When END is displayed, press
Yes
to exit the
MENU and begin weighing, or press
No
to
move to the Calibration Sub-menu.
The first Exponent setting is flashed on the display. The Exponent settings are SET 0,
SET 1, SET 2, SET 3, SET -3, SET -2, and SET -1. Press
No
as each Exponent setting
is displayed to display the next setting. When the desired Exponent is displayed,
press
Yes
to accept this Exponent and go to the next variable, LSD.
Set the Exponent
When E appears on the display, press
Yes
to
edit the Exponent. Press
No
to go to the next
variable, LSD.
Change the Exponent
Edit the Factor
When the Factor is displayed, the first digit is flashing. Press
Yes
to accept, or
No
to display the next incremental value for this digit. When the desired value
flashes, press
Yes
to accept this value; this will activate the next digit. Press
No
to change, or
Yes
to accept this value. Repeat for the other digits until all digits
have been accepted.
Note
: To accept the Factor as a whole, each digit must be accepted, even if
this digit has not been changed.
When all digits have been accepted, the new Factor flashes on the display.
Press
Yes
to accept this Factor and display Exponent. Press
No
to re-edit the Factor.
3.5.4 Unit Sub-menu (Cont.)
