Adventurer SL
EN-19
Filter
The Filter Menu Item is used to match
the filtering level to the balance’s environment.
Use the low setting (SET LOW) when
environmental disturbances are not present.
Use the medium setting (SET MED) for normal
environments.
A
uto Off
The Auto Off Menu Item is used to set the
automatic shut off time interval as follows:
SET OFF = always on
SET 1 = shuts off after 1 minute
SET 2 = shuts off after 2 minutes
SET 5 = shuts off after 5 minutes
If it has not been disturbed for a specified time interval, the balance will
automatically turn off. When A OFF is displayed, press
Yes
to view the setting.
Press No
No
No
No
No to change the setting, or Yes
Yes
Yes
Yes
Yes to accept the setting and go to the Global
Reset Menu Item.
The Setup Sub-menu is used to define the
following operational parameters, automatic
zero-tracking capture range, filter level and
Automatic Zero-Setting
Environmental changes can cause the display
to drift. The Automatic Zero-Setting Mechanism
(AZSM) is designed to keep the balance set at
zero, despite these slight changes.
Press
Yes
to enter the AZSM. The display
shows the first Automatic Zero-Setting option.
Press No
No
No
No
No to view the next setting.
SET 2d, or SET 5d. The default setting is SET 1d.
3.5.2 Setup Sub-menu
automatic shut off time interval. The Global Reset function is also included in this
Sub-menu.
With the balance turned off, press and hold
On
until MENU is displayed, then release
the button. Press
No
when Calibrate is displayed. Press
Yes
when Setup is displayed.
Setting options are Set OFF, SET .5d, SET 1d,
Press Yes
Yes
Yes
Yes
Yes to accept the setting on the display and go to the FILTER Menu Item.
(d = divisions of readability).
Use the high setting (SET HIGH) when vibrations or air currents are present.
When FILTER is displayed, press
Yes
to view the setting. Press No
No
No
No
No to change this
setting, or
Yes
to accept the setting and go to the Auto Off Menu Item.
