Adventurer SL
EN-23
6HW2II
6HW0RPPH
6HW0HVJKDO
Custom Unit
Custom Unit is used to create a unit of measure not provided with the balance, and
to display weight measurements in this custom unit. Before using Custom Unit, it
must be Set ON in the Unit Sub-menu. The Custom Unit is defined by a conversion
factor and a Least Significant Digit (LSD). The conversion factor is created by entering
a Factor and an Exponent (E) of the weight in grams, according to the formula:
Custom Unit = Factor x 10
E
grams
.
.
.
.
. The balance will use this to convert grams to a
custom unit of measure. The Factor is a value from 0.1000000 to 1.999999. The
Exponent moves the decimal point of the factor to the right or left. The Least Significant
Digit (LSD) is the value by which the displayed weight is increased or decreased.
To create a custom unit, press
Yes
when
UNIT is displayed.
Note
: Variables for defining a Custom Unit appear once in the following order:
FACTOR, E, and LSD, followed by END UNIT.
3.5.4 Unit Sub-menu (Cont.)
M-Units (Momme, Mesghal)
When UNIT m is displayed, press
Yes
to show M-Units settings.
These are SET OFF, SET MOMME, or SET MESGHAL. SET OFF is the default setting.
Note
: Only one M-Unit may be enabled at a time.
Press
No
until the desired setting is displayed. Press
Yes
to accept the setting and
return to the Unit Sub-menu.
.
When FACTOR appears on the display,
press
Yes
to display the Factor. Press
No
to go to the next variable, Exponent.
Set the Factor
