Adventurer SL
EN-21
3.5.3 Mode Sub-menu (Cont.)
Average Piece Weight (APW) Optimization
Refer to Section 3.3.2 for information on
APW Optimization. To set APW Optimization
On or Off, Count must be SET ON in the Mode
Sub-menu.
Press Yes
Yes
Yes
Yes
Yes to accept the displayed setting
and return to the Mode Sub-menu, or
No
to go to the other setting. The default
setting is SET ON.
Percent
To set the Percent Mode On or Off, go to
Percent on the Mode Sub-menu. Press
Yes
to display the Percent setting,
or press No
No
No
No
No to go to the next item in the
Mode Sub-menu.
Percent Weigh is either SET ON or SET OFF.
Press
No
to go to the other setting. Press
Yes
to accept the displayed setting and
return to the Mode Sub-menu. The default
setting is OFF.
End Mode Menu
When END MOD is displayed, press
Yes
to exit the Mode Sub-menu and go to the
Unit Sub-menu, or press
No
to return to
the first Menu Item in the Mode Sub-menu.
3.5.4 Unit Sub-menu
The Adventurer SL can be configured to
measure in a variety of units, including
custom units. The Unit Sub-menu is used
to enable or disable a specific unit.
From Menu, press and release
No
until
UNIT displays. Press Yes
Yes
Yes
Yes
Yes to enter the Unit
Sub-menu. The unit is indicated by a
small character next to Unit in the display.
For example, grams is shown as g.
Press Yes
Yes
Yes
Yes
Yes to display the APW setting as either SET ON or SET OFF.
Refer to Section 5.3 for a complete list of units of measure.
