INPT
Input type
UNIT
Process units
RESO Display resolution
IN.LO
IN.HI
SHIF
PV shift (offset) value
FILT
PV filter time constant
OUT1 Output 1 function
O1.HY
HSP.L Lower limit if HSP1
HSP.H Upper limit of HSP1
LSP.L Lower limit of LSP1
LSP.H Upper limit of LSP1
OUT2
Output 2 function
ADDR
BAUD Baud rate
PARI
Parity bit
AL.FN Alarm function
AL.MD Alarm mode
AL.HY Alarm hysteresis value
AL.FT Alarm Failure transfer
EIFN
Event input function
DISP
Normal display format
PV.HI Max. historical PV
PV.LO Min. Historical PV
T.ABN Abnormal time
Menu Overview
Low scale value for
linear input
High scale value for
linear input
Address for digital
communication
Output 1 hysteresis
value
Setup Mode
Press
for 4 sec.
Process value
or SAFE
SP2 Value
LSP1 Value
HSP1 Value
Process
Value
Set point 2
value
Low limit
set point 1
value
High Limit
set point 1
value
NOTE 1: The flow charts show a complete listing of
parameters. For actual applications, the number of
available parameters is dependent on the set up condi-
tions, and should be less than that shown in the flow
charts.
NOTE 2: Press key for 4 seconds to enable
up/down key function and the LOCK indicator will be
extinguished.
12
Display Form
: These characters are displayed differently
