Clamp pincer CP 10 / CP 20 / CC 20
2
Basic safety instructions
Issue 11.15
08902961
2-9
2.5 Conversions,
modifications
•
Clamp pincer CP 10 / CP 20 / CC 20 must not be modified either constructively or with respect to safety
features without express permission from OETIKER. OETIKER shall not be held liable for any damages
resulting from any such modifications.
•
The housing halves of clamp pincer CP 10 / CP 20 / CC 20 are sealed with a security label. The screws on
the adapter to the pincer head are sealed with sealing varnish. If the seal is damaged, OETIKER will not
accept any claims under warranty. In particular, repairs of any kind, with exception of the pincer head, are
prohibited.
•
Use only Original spare parts and accessories.
•
Do not dismantle any safety equipment or features.
2.6 User
qualification
Only authorized and qualified personnel are permitted to use this machine, subject to compliance with the
technical data and the following safety rules and regulations. Qualified personnel are people who are familiar
with handling, assembling, commissioning and operating the pincer and who have the qualifications appropriate
to their job role.
2.7 Maintenance
work
The inspection and maintenance intervals specified in the instruction manual must be complied with. The
maintenance and repair manual must be observed (see chapter 6.2, p. 6-32).
2.8 Storage
and
transport
To protect clamp pincer CP 10 / CP 20 / CC 20 against damage, it must be cleaned after each use and before
transport and placed in the supplied pincer case. The battery must be disconnected from clamp pincer CP 10 /
CP 20 / CC 20 for this purpose.
