Clamp pincer CP 10 / CP 20 / CC 20
6
Maintenance and repair
6. Remove side plate (Fig. 27/9).
Fig. 27:
Removing the side plate
7. Remove compression spring (Fig. 28/11), cover
plate(Fig. 28/12) and pincer jaws (Fig. 28/10).
8. Grease and assemble replacement pincer jaws
(Fig. 28/10) and compressions spring
(Fig. 28/11) from the pincer jaw replacement kit
and pin (Fig. 28/14) with special lubricant
RENOLIT LX-EP 2 (RENOLIT Duraplex EP 2).
9. Reassemble in reverse order
using new
lock
washers
(Fig. 26/6)
.
10. Check mobility of pincer jaws (Fig. 28/10).
11. Screw the pincer head on to the clamp pincer
and, holding the adapter, tighten the union nut.
The plunger (Fig. 25/2) must lie between the
two pincer jaws (Fig. 28/10).
Fig. 28:
Fitting the pincer jaws
Issue 11.15
08902961
6-35
