OETIKER CP 10, Инструкция по эксплуатации

Страница: 34 / 54

Clamp pincer CP 10 / CP 20 / CC 20 6 Maintenance and repair
NOTICE
Damage to the clamp pincer by fitting unauthorized parts!

Only use original OETIKER pincer jaws. Only fit the designated pincer jaw type in the pincer head.
1. Remove the battery.
2. Unscrew union nut (Fig. 24/2).
Fig. 24: Unfastening the pincer head
3. Disconnect pincer head (Fig. 25/3) from the
clamp pincer (Fig. 25/4).
The plunger (Fig. 25/2) stays in the clamp
pincer (Fig. 25/4).
Fig. 25: Disconnecting the pincer head from the clamp
pincer
4. Remove two lock washers (Fig. 26/6) on pincer
head (Fig. 25/3).
Do not push back pin (Fig. 26/7)!
5. Unscrew two hexagon nuts (Fig. 26/8) from the
hexagon bolts (Fig. 26/5).
Fig. 26: Dismantling the pincer head
Issue 11.15 08902961 6-34