Clamp pincer CP 10 / CP 20 / CC 20
8
Attachment
Issue 11.15
08902961
8-48
8.4
Decommissioning and storage
If cordless clamp pincer CP 10 / CP 20 / CC 20 is to remain out of service for an extended period, it must be
decommissioned.
•
Remove the battery from the clamp pincer.
•
Replace defective parts.
•
Clean clamp pincer CP 10 / CP 20 / CC 20 before storing.
•
Store clamp pincer CP 10 / CP 20 / CC 20 in the case in a clean, dry place and so it is protected from dust.
8.5 Recommissioning
•
Perform commissioning (see chapter 4, p. 4-14 and chapter 5.2, p. 5-23).
8.6 Disposal
The product must be disposed of in accordance with the EC Directive 2002/96/EC:
Dispose of packaging materials in accordance with local regulations.
The individual components of the device must be disposed of separately.
Drain the oil and dispose of it at a special disposal point.
Dispose of the battery separately in accordance with the battery disposal regulations.
The device, all spare parts and in particular the consumable fluids used and other environmentally polluting
substances must be disposed of by specialist firms in accordance with applicable statutory regulations.
If necessary, please seek advice from OETIKER.
8.7 Technical
data
8.7.1 USB interface
INFO
•
The USB port is used exclusively for data transfer with the PC.
•
Before the USB connection from the PC to clamp pincer CP 10 / CP 20 / CC 20 is first established, a
driver must be loaded on to the PC and installed. Installation is automatic.
If automatic installation fails, the necessary driver is located in the installation directory of the PC and can
be installed manually.
•
Once the USB connection has been plugged in, program CP 10 / CP 20 / CC 20 may need to be
reopened in order to locate the driver.
