Clamp pincer CP 10 / CP 20 / CC 20
3
Overview
3 Overview
3.1 System
overview
•
The pincers enable flexible, cordless and precise installation of OETIKER ear clamp models and MCRs.
They ensure high repeatability of the closing force and enable far-reaching process monitoring with easy
setting of the closing parameters.
•
The pump bodies and all operating parts are made of high-strength materials and have been rigorously
tested.
•
The pincer housing is made of glass-filled insulating and shock-resistant polyamide.
•
The device is designed to be ergonomic, compact and robust.
•
The device has a high return supply volume, for quicker operating cycles.
•
The software supplied allows the process data to be displayed on a PC.
•
The device is equipped with a microcontroller control system.
•
Pressure monitoring is performed by an electronic pressure sensor.
•
The level of battery charge is monitored continuously.
•
Service management is monitored electronically.
•
The traceability of the operating cycles is ensured by automatic recording and saving of the process data in
an internal memory. A maximum of approx. 100,000 operating cycles can be saved.
•
A mini USB port allows the saved data to be read, settings performed and software updates performed.
•
Additional LED displays for quick info regarding machine status and process results.
•
High availability due to long maintenance intervals (maintenance necessary every 40,000 closures).
The overall design of the CP 10 / CP 20 / CC 20 cordless clamp pincer system consists of the following main
components:
1 Cordless clamp pincer CP 10 /
CP 20 / CC 20
2 PC with installed software (PC
not included in scope of supply)
3 Accessories
Fig. 1:
Structure of entire system CP 10 / CP 20 / CC 20
Issue 11.15
08902961
3-11
