ADJUSTMENTS AND
MAINTENANCE
UT-MT-0812_2.0_24-01-2023 (EN)
Use and Maintenance Manual
LERA
37
The assembly of the power supply cable must be performed only by professional staff, in
compliance with all the safety requirements of the laws and regulations in force in the country
of use.
Carry out operations on the bench, with all elements detached from energy sources. Never
operate on potentially active components.
Unscrew the cable clip nut of the bulkhead coupling and remove it from the fixture.
Remove the cables from the terminals unthread the cable from the terminal block, paying attention not to damage
the gasket.
The bulkhead can be reused for a maximum of 10 times with connectors of same dimensions.
If necessary, proceed to open the fixture and to replace the bulkhead.
