OCEM LERA P-001 Скачать руководство пользователя страница 12

Страница: 12 / 64

DESCRIPTION

UT-MT-0812_2.0_24-01-2023 (EN)

Use and Maintenance Manual

LERA

2.2

Use

The fixtures LERA are realised in different versions, to meet the requirements of the regulations depending on

the use:

●

Axis and bar approach: module 14 LED WHILE colour

●

Side approach bars: module14 LED RED colour

●

Threshold: module 14 LED GREEN colour

●

Wing bars: module 14 LED GREEN colour

●

Runway end: module 7 LED (with separate lens) RED colour

●

Stop bar (FAA): module 7 LED (with integrated lens) RED colour

●

Stop bar (ICAO): module 7 LED (with integrated lens) RED colour

2.3

Configuration and assembling

The fixtures LERA are supplied in different configurations depending on the assembly mode provided for the device:

●

Direct assembly: the fixtures are complete with frangible coupling (configuration/assembling: P-001). The

body is directly installed on the coupling that is fastened to the anchorage (threading 2” GAS). The fixture

in this configuration is completely assembled, with bipolar plug FAA L-823 Style

●

Mounting on pole with frangible coupling: the fixtures are supplied without pole and without coupling

(configuration: C). Depending on the configuration the fixtures can be supplied in the following configurations:

000: fixture without power cable, suitable for the mounting on pole with frangible coupling. The bulkhead

connector installed on the body of the fixture is equipped with connector which allows the connection to

be made without opening the fixture. The parts required for assembly (bipolar cable and connector kit

FAA L-823 Style 5, pole Ø 60 mm and frangible coupling) must be ordered separately. For further details,

please refer to the mounting accessories table.

050: fixture already assembled, complete with power supply cable (two unipolar conductors L = 500 mm

with plug FAA L823 Style 4) and ground cable, suitable for the mounting on pole with frangible coupling

of maximum height 300 mm. The parts required for assembly (pole Ø 60 mm and frangible coupling)

must be ordered separately. For further details, please refer to the mounting accessories table.

250: fixture semi-assembled, complete with power supply cable (bipolar cable L = 2500 mm) equipped with

plug FAA L-823 Style 1 and ground cable, suitable for the mounting on pole with frangible coupling. The

cable is supplied separately: it is possible to cut the cable to length and proceed to assembly. The bulkhead

connector installed on the body of the fixture is equipped with connector which allows the connection

to be made without opening the fixture. The parts required for assembly (pole Ø 60 mm and frangible

coupling) must be ordered separately. For further details, please refer to the mounting accessories table.

The threshold, wing bars and runway end use fixtures are normally mounted on the frangible

coupling (configuration/assembly: P-001).

Axis fixtures and approach bars are normally mounted on a pole with a frangible coupling

(configuration: C | NOTE: actual pole length fixed by the installation project!).

The approach bars, side approach bars fixtures are normally mounted on folding poles

(configuration: C | NOTE: actual pole length fixed by the installation project!).

Содержание LERA P-001

































































Результаты поиска

Содержание LERA P-001

Отзывы:

Похожие инструкции для LERA P-001

Бренды по названию

Популярные бренды

OCEM LERA P-001, Руководство пользователя

Результаты поиска

Содержание LERA P-001

Отзывы:

Похожие инструкции для LERA P-001

Бренды по названию

Популярные бренды