INST
ALLA
TION
UT-MT-0812_2.0_24-01-2023 (EN)
Use and Maintenance Manual
LERA
26
3.8
Pointing and alignment on folding pole
The positioning of the light elements varies depending on the use.
Ensure that the device is used correctly for its intended purpose, in accordance with the
installation project and the regulations in force.
For correct evaluation of angles, take into account the orientation of the support pole.
Install the pointing tool on the body of the fixture and proceed to adjust the light beam.
Use the pendulum goniometer to correctly align the fixture.
Make small movements until reaching the right position.
Keeping the alignment fixed, tighten the screws present on the coupling to the indicated torque paying attention
not to send the locking nut to stroke on the coupling. Therefore tighten the nuts to the indicated torque.
