OCEM AUGIER energy DIAM3100 Series, Установка и обслуживание

Страница: 12 / 68

DIAM3100©2012 AUGIER SA.
I-12
I.2 MECHANICAL
DESCRIPTION
I.2.1 DESCRIPTION
Each CCR is housed in a cabinet fitted with removable lifting rings. The frame has two distinct parts: a control
part (in front) and a power compartment (at the back).
•
The Control part of the CCR contains all the components connected to the power supply with, for example,
the thyristors and associated driver boards, the master switch, the LV fuses and connection terminals. It is
located after opening the front door. The main electronic circuit board and the EFD board are fitted to the
front door of the cabinet. All these parts are accessible from the front of the CCR.
•
The Power part, situated at the back of the CCR, contains all the components connected to the output loop
such as the power transformer and the lightning arrestors (option). The tapping terminals are also
accessible from this side.
All these components are easily accessible from the front, or the back of the cabinet.
I.2.2 GENERAL MECHANICAL FEATURES
All regulator’s component are contained in the same cabinet. Cabinets are provided with lifting rings and can be
located side by side. Up to 3 units can be stacked.
•
Dimensions : 500mm Wide x 700mm Deep x 550mm High (+130mm for rollers)
•
Protection Index for the Casing: IP 20.
•
Usage: Ambient temperature from -20°C (IEC type) to +55°C with maximum relative humidity of
95%. Natural air cooling.
•
Three units can be stacked, in order to save floor space.
•
Weight : (Can be modified according options)
1 unit 6.5kVA : 115kg
I.2.3 STORAGE CONDITIONS
The components are designed to be stored in a dry, airy location, sheltered from rain, water discharges
and chemical agents. We must be consulted if the components are to be stored outside, or in an ambient
temperature out of the range -40°C/+55°C.