OCEM AUGIER energy DIAM3100 Series, Установка и обслуживание

Страница: 8 / 68

DIAM3100©2012 AUGIER SA.
I-8
I.7 OPTIONS ________________________________________________________________________ I-24
I.7.1 EARTH FAULT DETECTOR (EFD) ________________________________________________ I-24
I.7.2 CUT OUT AND EARTHING PLATE ________________________________________________ I-25
I.7.2.1 Normal position : _____________________________________________________________ I-25
I.7.2.2 Safety position: ______________________________________________________________ I-25
I.7.3 OUTPUT LIGHTING ARRESTORS ________________________________________________ I-26
I.7.4 CASTERS ____________________________________________________________________ I-26
I.7.5 BURNT LAMP DETECTION: _____________________________________________________ I-26
I.7.6 WIG WAG ____________________________________________________________________ I-27
II INSTALLATION _____________________________________________________ II-29
II.1 PREPARATION ___________________________________________________________________ II-29
II.1.1 EQUIPMENT RECEPTION ______________________________________________________ II-29
II.1.1.1 Equipment delivered: ________________________________________________________ II-29
II.1.1.2 Checking the equipment:_____________________________________________________ II-29
II.1.2 TRANSPORTATION ___________________________________________________________ II-29
II.1.3 DEVICE LOCATION ____________________________________________________________ II-30
II.1.4 STACKING DEVICES __________________________________________________________ II-30
II.1.5 CHECKING THE INSTALLATION _________________________________________________ II-31
II.1.5.1 Single phase power supply : __________________________________________________ II-31
II.1.5.2 LV Protection : _____________________________________________________________ II-31
II.1.5.3 Lighting loop : _____________________________________________________________ II-31
II.1.5.4 Control by remote control : ___________________________________________________ II-31
II.2 CONNECTIONS __________________________________________________________________ II-32
II.2.1 POWER AND EARTH __________________________________________________________ II-32
II.2.1.1 LV supply: ________________________________________________________________ II-32
II.2.1.2 Earthing __________________________________________________________________ II-32
II.2.1.3 Lighting loop: ______________________________________________________________ II-33
II.2.2 REMOTE CONTROL CONFIGURATION ___________________________________________ II-34
II.2.2.1 Connectors: _______________________________________________________________ II-34
II.2.2.1 Remote control possibilities: __________________________________________________ II-34
II.2.2.1 RS485/RS422 JBUS link: ____________________________________________________ II-35
II.2.2.2 Ethernet link: ______________________________________________________________ II-37
II.2.2.1 SOURIAU multiwire remote control with 20 to 60Vdc control supply ___________________ II-38
II.2.2.1.1 Control (20 to 60 Vdc only) : __________________________________________________ II-38
II.2.2.1.2 Monitoring (dry contacts): ____________________________________________________ II-38
II.2.2.1.3 Wiring remote control voltage configuration ______________________________________ II-39
II.2.2.2 Circuit selector: ____________________________________________________________ II-40
II.3 ADJUSTING THE CCR _____________________________________________________________ II-41
II.3.1 ADAPTATION TO LOAD ________________________________________________________ II-41
II.3.2 PARAMETER MODIFICATION ___________________________________________________ II-42
II.3.2.1 Preferred configuration values: ________________________________________________ II-42
II.3.2.2 Brightness values: __________________________________________________________ II-43
II.3.2.3
Value of “Open Circuit” protection level: _________________________________________ II-43
II.3.2.4
Value of “Overcurrent” protection levels: _________________________________________ II-43