Oce VarioPrint 2045-65 NC, Руководство по эксплуатации

Страница: 195 / 213

Safety information 193
EPA E
NERGY
S
TAR
®
Introduction
Océ-Technologies B.V. has joined the E
NERGY
S
TAR
® Program of the United
States Environmental Protection Agency (EPA). The purpose of the E
NERGY
S
TAR
® Program is to promote the manufacturing and marketing of
energy-efficient equipment, thereby potentially reducing combustion-related
pollution. Using the energy management features outlined below prevents
unnecessary power consumption, which helps to prevent air pollution from
electricity generating plants and saves money on your utility bills.
As an E
NERGY
S
TAR
® Partner, Océ-Technologies B.V. has determined that
from the Océ VarioPrint 2045-65 Network Copier series the Océ VarioPrint
2055 and Océ VarioPrint 2065 meet the E
NERGY
S
TAR
® guidelines for energy
efficiency. The Océ VarioPrint 2045 has the same energy efficiency features
but does not meet the E
NERGY
S
TAR
® requirement for the low power mode.
Read the Product Safety Data Sheet in this appendix for power consumption
data.
Read the Océ VarioPrint 2045-65 NC Configuration and Maintenance Manual
to set the energy save modes.
Features
The E
NERGY
S
TAR
® Criteria include the following features:
■
The energy save modes:
Low power mode
The Océ VarioPrint 2045-65 NC enters automatically the low power mode
15 minutes after completion of the last job. The Key Operator can adjust the
low power mode default time (1-15 minutes).
Sleep mode
The Océ VarioPrint 2045-65 NC enters automatically the sleep mode 90
minutes after completion of the last job. The Key Operator can adjust the
sleep mode default time (10-90 minutes).
If the above mentioned default times for the low power mode (15 minutes)
or sleep mode (90 minutes) cause inconvenience, request the service
technician to increase the limit to a maximum of 240 minutes. We suggest