Oce VarioPrint 2045-65 NC, Руководство по эксплуатации

Страница: 143 / 213

The scan function 141
Prepare the scan job
Introduction
When preparing a scan job, first inspect your originals. If the originals are
different sizes and types, sort the set of originals into separate job parts. Each
job part requires a different setting profile. The combine key allows you to
create one assembled scan job from the separate job parts.
The Océ VarioPrint 2045-65 NC has two input locations for your originals, the
automatic document feeder and the platen.
Standard originals
Non-standard originals
Job parts
If the set of originals has more than one original type, make separate job parts.
Then, enter the settings for each job part.
A standard original represents:
A standard size (11 x 17, 8.5 x 11 or 5 x 8)
A standard weight (30 -80 lb. bond)
A non-standard original represents:
A page of a book
A curled or damaged original
A non-standard size (not 11 x 17, 8.5 x 11 or 5 x 8)
A non-standard weight (less than 30 lb. bond or more than 80 lb. bond)
Split the set of originals in separate job parts if the set of originals con-
tains:
One or more non-standard originals
More than 50 8.5 x 11, 50 5 x 8 or 35 11 x 17 originals